2005 Saab sas reset failed.
1698 Views 4 Replies Latest reply: 2019-11-22 18:04:04
-
Level 1
(8) points
Trying to reset/recalibrate the steering angle sensor on a 2005 saab 9-5 2.3T. I have a new ms906ts. The menu option is there, but when I tell it to go it just displays "device limits exceeded". It does the same thing on a 2006 saab 9-5 2.3T. I borrowed a Tech II, and it reset them just fine. Maybe I am missing something????? Any suggestions would be appreciated. On a side note, I also get the same "device limits exceeded" message when trying to change the esp settings on both cars. -
Level 9
(5837) points
Did you send the log files to tech support to have a look what is the problem it could be it needs bug fixing in the software..........
-
Level 10
(7578) points
I was unable to do the IVD (interactive vehicle dynamics ) calibration on a 2004 Lincoln Navigator which requires turning the steering from one stop to the other, because I believe the turning angle degrees exceeded what the Maxi Sys displayed in Live data as the normal steering angle pid range , the PID would read in the red after going past a certain amount of degrees to reach the stops which might have been a factor in the failure to perform the procedure. -
Level 1
(8) points
Yes, I sent a datalog a few weeks ago, got no response. So, I am unsure if they got it, or are working on it. I thought I would try here, maybe I am missing something. There is no internet at my shop, and I do not have WIFI at home, so logging the scanner online is a little interesting. Again, just wanted to make sure I was not missing something simple. Thanks -
Level 9
(5837) points
Send your request here on there website...............https://www.auteltech.com/support/3132
1
Total1 Pages
- Related links
-
Top users
-
Online users
-
Search Communities